Used | Analogue Haven

	4ms pingable envelope generator the pingable envelope generator (peg) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or "pings". the peg has full cv control of envelope shape, skew, and ping (clock) division/multiplication, as well as a plethora of triggering and cycling options (ad, ar, quantization, cycle), and a tap tempo button for each channel. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $294.00
	4ms shuffling clock multiplier the scm measures the time between the previous two pulses, and uses that value to calculate the frequency of the clock signals on the output jacks. applying a steady clock will produce an output clock of equal frequency on the x1 jack, and a clock of double the frequency on the x2 jack... and a clock of eight times the frequency on the x8 jack. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $140.00
	addac system addac111 & 111b expander combo the .wav player basic principle of operation is simple: the loop size, start point and sample rate defines how the loop is played. loop settings defines if sample is looping or playing only once. file access if it advances to the next or previous file. the vca section controls the overall volume of the module. and finally the envelope follower generates a cv voltage related to the amplitude of the audio signal pre-vca. an expansion module, addac111b, was also created to allow users to recall the first 8 files through dedicated trigger signals. this allows sequencing of files. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $499.00
	ajh synth minimod glide + noise: black there is a lot of power and funtion contained within this deceptively small 6hp module. it features both the glide and the noise generator circuitry from the vintage model d synthesiser. the minimod glide uses a discrete dual fet circuit which includes a hold function that can gate the glide effect. glide is only active when the hold cv input is high, so if the hold input is connected to the gate output of a midi/cv convertor then the glide will be active only while the key is actually depressed, emulating the exact behaviour of the original model d synthesiser. they have also increased the versatility of the module by adding glide up only and glide down only modes in addition to the standard glide up & down mode of the original circuit. the noise generator is completely separate from the glide circuitry. there are three outputs offering white noise, pink noise and red noise. the noise source itself is all analogue and uses a specially selected transistor in avalanche mode which is amplified and filtered by discrete transistor based circuitry. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $204.00
	alm busy circuits alm007: boss bow tie 'boss bow tie' is an 8 way bidirectional voltage controlled switch. an input 'i/o' signal is mapped to an output 'i/o' via a corresponding control voltage. as bidirectional, this can be either 1 of up to 8 inputs into a single output or a single input into 1 of up to 8 outputs. the control input features both an attenuverter and offset to precisely select which of the 8 i/o's are available to be 'switched'. a normalized 'gate' input enables and disables the switch allowing for rhythmic and other effects. the module is intended primarily for flexible routing of cv signals. though audio signals will work - audible clicks can sometimes be apparent when switching i/o's. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $213.00
	art for the ears 104 hp 3u dovetail skiff: oak non-powered 104 hp oak wooden skiff. the case is in good physical condition. for more information, please click here. our used price : $236.00
	audiodamage adm06: sequencer 1 sometimes, a company has to throw down the gauntlet and say "this right here is the best thing, period, full stop." sequencer 1 is that thing. it is, empirically, the most sophisticated euro-rack sequencer available. with a musically intuitive approach to programming, a massive helping of generative functions, and a feature list as long as, well, a really, really long list, sequencer 1 covers all the bases, and then some. with micro sd card storage and software updates, backing up and updating are as easy as dragging and dropping. four banks of 16 patterns (each up to 64 steps) make live performance a breeze. front-panel one-push access to all commonly-used features means no menu diving, no rote memorization of hex codes, and no confusion. 1v/oct, hz/v and gate/inverse gate/s-trig outputs mean it'll drive both modern eurorack and vintage analog synths. hell, the three tempo-synced lfos are worth the price of admission alone. in short, sequencer 1 is the end-all-be-all of production sequencers, for both studio use and live performance, and the feature list will only get longer, with a clear roadmap of updates and additions, and all the programming knowledge and experience that audio damage can bring to bear on this, our flagship product. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $560.00
	audiodamage adm10: kompressor the kompressor is, as the name implies, a dsp-based buss compressor for the eurorack format, with two operating modes: true stereo, or mono with sidechain. equally at home taming your master outputs or drum mix, or sidechain-pumping a bass or synth line, kompressor brings our incredibly popular dynamics code, used in many of our plug-in products (including rough rider, rough rider pro, and kombinat dva), in to the realm of hardware. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $232.00
	bastl instruments cv trinity the cv trinity has 6 independent channels with cv outputs, each of which can be set to automation, lfo or adsr. each channel also has a cv input. the selected output [select out] outputs a copy of the channel that is selected for editing and lights the indication led. use select buttons for selecting the channel and knobs for adjusting its parameters. pressing the mode button changes between the modes. clock out can be adjusted by holding select button and turning the top knob. clk out is normalized to clock in automation is 32 step voltage memory with adjustable amount of linear interpolation. hold the record button and turn record knob to adjust the automation curve. clock input advances to next automation step. automations can be variable number of steps and can be clocked either by master clock input or by individial cv inputs. lfo has rate that goes up to audiorate, xor waveshaping and shape selection with ramp, triangle, inverted ramp, flopping ramp, flopping triangle and stepped random voltage source with smoothing. the random signal can be looped. lfo can by synchronized to clock input (different divisions/multiplications are than set with the rate knob). cv input controls the rate of the lfo. adsr uses the cv input as gate input for triggering the envelope. it can be linear or exponential, it can be looped and it can either work in adsr mode or ahr mode. decay is set to the same value as release. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $248.00
	bastl instruments knit rider & expander combo the knit rider is a very versatile 6 voice trigger sequencer with a fast, modern workflow. there are 4 bars in one pattern, every bar has 16 steps, each of which has 4 sub-steps, which makes it 256 steps per pattern. and there are 64 patterns in total ! this allows you to create very detailed patterns while retaining the intuitivity and speed of classic 16 step sequencers. use the bar buttons to navigate inside the 4 bars. hold a certain step - the bar buttons will now show the substeps in that step - press the bar buttons to edit the substeps. the knit rider expander adds clock out and reset in / out connections to the knit rider sequencer. an additional feature of this expander is a 3-way passive multiple with clock inverter. the lower 3 connectors are simple passive multiples. the units are in good physical condition and work perfectly. for more information, please click here and here. our used price : $284.00
	bastl instruments rumburack case 2 rows of 52hp in a portable wooden eurorack case with leather carrying strap. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $750.00
	bastl instruments skis in the front of every ski there is a curve similar to a decay envelope. skis module has two channels a and b and each of them consists of a decay envelope with knob control and a vca. there is a trigger input to trigger the envelope, a buffered envelope output which is normalised to the cv input of the vca. than there is signal in and out of the vca. there is also a crunch switch which activates a special mosfet lo-fi vca circuit inspired by designs of standa filip. this adds a slight crunchy character which changes with the decay of the envelope. a typical application of skis is to take two signals (noises for example) and generate drum sounds with adjustable decay from them with a trigger signal. however, you can also use the two vcas and two decay envelopes independently. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $92.00
	blue lantern tadpole sequencer circuits found on the tadpole sequencer: a 16 step cmos-based sequencer, an internal cv variable pulse clock, a cmos-based logic inverter, and a cmos-based clock divider circuit. module is in good condition & 100% working order. for more info click here. our used price : $308.00
	blue lantern transistor pyramid core vco so what does the tpc vco do? it is considered a synthesizer 'singer' or voice. this module generates audio signals, and at slow frequency can control other modules (lfo mode). blue lantern also included an analog sample and hold circuit, internally clocked by the core vco. the module is complimentary to the lunar moduation center vco. both contain the same discrete, transitor core triangle generator. module is in good condition & 100% working order. for more info click here. our used price : $260.00
	boredbrain optx the optx is a compact and bi-directional adat lightpipe converter for eurorack synthesizers. the module provides 8 channels of input and output expansion to many pro audio interfaces, and may be used standalone to interconnect eurorack systems. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $280.00
	delptronics ldb-1x: little drummer boy expansion the ldb-1x expansion module is an expansion module for the original ldb-1e little drummer boy. it provides the following features: separate output jack and volume control for each drum and a summed output (post individual volumes) with its own volume control. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $72.00
	doepfer a-100b10 space blanking panel 10hp blank panel. for more information, please click here. our used price : $5.00
	doepfer a-100b12 space blanking panel 12hp blank panel. for more information, please click here. our used price : $6.00
	doepfer a-100b14 space blanking panel 14hp blank panel. for more information, please click here. our used price : $7.00
	doepfer a-100b16 space blanking panel 16hp blank panel. for more information, please click here. our used price : $7.00
	doepfer a-100b20 space blanking panel 20hp blank panel. for more information, please click here. our used price : $9.00
	doepfer a-100b42 space blanking panel 42hp blank panel. for more information, please click here. our used price : $12.00
	doepfer a-110-2 basic vco: vintage edition module a-110-2 is a low-cost voltage-controlled oscillator. it's a slightly reduced version of the standard vco a-110-1. compared to the a-110-1 the a-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. in return the a-110-2 is equipped with an additional linear fm input and a soft sync input. a jumper is used to select the range of the tune control between about ½ octave and about 4 octaves. the width of the module is only 8 hp compared to the 10 hp of the a-110-1. the unit is in good physical condition and works perfectly. for more infomation, please click here. our used price : $124.00
	doepfer a-111 vco 2 module a-111-1 (vco 2) is a voltage controlled oscillator. the vco has a range of about 12 octaves, and produces four waveforms simultaneously: pulse (rectangle), sawtooth, triangle and sine waves. the vco's frequency is determined by the position of the range switch, tune and fine tune controls, and the voltage at the two pitch cv inputs, cv 1 and cv 2. footage (the octave of the fundamental) is set by the range control, which has seven octave steps. the tune control is used for coarse tuning, and the fine control for fine tuning of the vco pitch. the a-111 can be modulated by both exponential and linear fm (frequency modulation). you can control the pulse width of the square wave either by hand, or by voltage control - pulse width modulation, or pwm for short. module is in good used condition & perfect working order. for more info please click here. our used price : $280.00
	doepfer a-131 exponential vca modules a-130 and a-131 provide voltage-controlled amplification. for audio signals, you would normally use the exponential vca (a-131), and for control voltages, the linear vca (a-130). it doesn't always have to be that way, though. the amount of amplification the vcas provide is determined by the voltage at the cv input, and the position of the gain control, which sets the overall gain in the system. the vca has two audio inputs, each with an attenuator. they are amplified by an amount determined by the combination of the gain and the two cv controls. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $76.00
	doepfer a-132-1 dual vca module a-132 (dual low cost vca) contains two voltage controlled amplifiers, with a linear response most suited to regulating the level of control voltages (adsr amount, level of vibrato effect, etc.). in non-critical situations, though, its vcas can be used to control audio signals. amplification is governed by the sum of the voltages patched into the two cv inputs. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $64.00
	doepfer a-138a mixer module a-138 is a four channel mixer, which can be used with either control voltages or audio signals. each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the audio chain - ie. it can be used to interface directly with an external mixer, amplifier, etc. a-138a: potentiometers with linear response, so especially suitable for control voltage mixing. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $64.00
	doepfer a-138b mixer: potentiometers with logarithmic response module a-138 is a four channel mixer, which can be used with either control voltages or audio signals. each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the audio chain - ie. it can be used to interface directly with an external mixer, amplifier, etc. a-138b: potentiometers with logarithmic response, so especially suitable for audio signal mixing. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $64.00
	doepfer a-145 low frequency oscillator module a-145 is a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies. five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave. the lfo can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a vco, modulation of the cut-off frequency of a vcf, or amplitude modulation with a vca. a three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to audio frequency at the highest. the lfo signal can also be synchronised, via the reset input. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $72.00
	doepfer a-149-2 digital random voltages a-149-2 is an extension module for a-149-1. it makes available 8 digital random voltages (i.e. only low/high states like a gate signal). the outputs are controlled by the "quantized random voltages" section of the assigned a-149-1 and correspond to the 8 digital outputs of the shift register that is used to generate the quantized random voltages. as the alteration of the a-149-2 outputs is clock controlled by the clk in of the "quantized random voltages" section of the a-149-1 the a-149-2 can be used to create random rhythmical sequences. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $60.00
	doepfer a-160 clock/trigger divider and a-161 clock/trigger sequencer combo module a-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. the trigger input will take clock signals from, eg., an lfo, midi sync, or the gate from a midi-cv interface. at the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. the a-160 also has a reset input. whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears. module a-161 is an eight-step clock sequencer which is internally connected to the clock divider (a-160). eight outputs are sequentially switched by the clock signals from the a-160 and can act, for instance, as sequential rhythmic triggers for an envelope. the reset on the a-160 also works on the a-161 (instant return to step 1). in combination with a mixer (a-138) short analog sequences can be generated. our midi-analog-sequencer maq16/3 is suitable for midi-controlled analog sequences up to 48 steps. a "real" analog sequencer with 8 steps is the a-155. the units are in good physical condition and work perfectly. for more information, please click here and here. our used price : $128.00
	doepfer a-170 dual slew limiter module a-170 contains two separate slew limiters, also known as portamento controllers or integrators. the first sl has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). the second sl has separate controls for rise and fall times, and can therefore be used as a simple ar envelope generator. over and above this, you can set the overall range for these parameters, with a three-position switch, as on the full adsrs. both slew limiters have two leds each, to show the state of the rising and falling voltages. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $64.00
	doepfer a-171 vc slew limiter module a-171 (vc slew limiter) is a voltage controlled slew limiter, otherwise known as a portamento controller or integrator. it is the voltage controlled version of the a-170. whenever there is an abrupt transition in the voltage present at the input, the slew limiter works as an integrator, slowing down the transitions in the output signal - so that abrupt transitions are sloped. the steepness of the slope is governed by the rate control. as well as manual setting of this slope, the a-171 also gives you the possibility of voltage control of the slope's gradient by patching in an appropriate voltage to two cv inputs, one of which has an attenuator for level adjustment. two leds serve as status indicators to show the relative amounts of positive and negative signals at the output. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $72.00
	doepfer a-190-8 usb/midi-to-sync interface module a-190-8 is a midi/usb to sync interface. the main application of the module is the control of clocked a-100 modules like sequencers (a-155), sequencer controllers (a-154), trigger divider (a-160 or a-163), trigger sequencer (a-161) and similar units. it may be used also to reset or sync lfos (e.g. a-145, a-147, a-143-4) or to trigger envelope generators (a-140, a-141-2, a-143-1, a-143-2) with a fixed clock rate. the unit is in good physical condition and works perfectly. for more information, please click here our used price : $144.00
	elby designs ed114: 4x4 ad/ar this novel envelope generator (eg) provides a versatile alternative to other designs. it features four input modes and four output signals. module is in good condition & 100% working order. for more info click here our used price : $172.00
	electronic music works crossfader 2-input mono crossfader. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $63.00
	eowave orage the orage is a triangle core based voltage controlled oscillator which enables different modulation types from thru zero fm synthesis, linear as well as exponential modulations, pulsewidth modulation to phase inversion modulation. it has 5 individual outputs for sine, triangle, saw, pulse, square waveforms. it also has a sync input. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $192.00
	erica synths pico seq the erica pico seq is mighty, performance oriented 16 step cv and gate sequencer, packed with virtually all possible features you may expect from a sequencer, just in 3hp! despite the small size it's easy to program, and most importantly - up to 16 patterns can be saved in memory and instantly recalled. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $116.00
	erica synths pico trigger the erica pico trigger module provides master clock for the pico system, as well as it generates up to 16 step patterns of 4 triggers - simple clock divider patterns, and more advanced polyrhythmic patterns of different step length for triggering drums. patterns are user designed in custom web interface, and can be uploaded to the module via clk in 3,5mm jack. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $100.00
	expert sleepers es-40 the es-40 is a eurorack format module which converts a standard s/pdif input to five channels of expansion headers, which are used in conjunction with the expert sleepers esx range of expanders (currently including the esx-8gt, the esx-4cv, the esx-8cv and the esx-8md). the es-40 will connect to any audio device using the s/pdif standard. this includes the digital audio output provided as standard on many recent macs. the es-40 also includes an s/pdif output for sending data back to the computer. this output is used by expansion modules connected to the es-40; currenty, the only such module is the es-7 cv input expander. the es-40 is essentially an es-4 with the dacs and cv outputs removed. much of what has been written about the es-4, and many tutorial videos etc., still apply to the es-40. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $104.00
	flame arpeggiator 2013 and x-2013 the module is a two-channel arpeggiator with separate analogue outputs for notes and two optional movable outputs for the sequence clock and the velocity. both arpeggio tracks (referred to as "arp" and "bass") plays notes also via midi-out (different midi-channels 1 and 2). the first four notes of the arp track note buffer forms the chord. the chord analogue outputs are the cv-outputs 1-4 (notes 1-4). the midi-channel of the transmitted chord is channel 3. use the module-keyboard for setting the chord/scale notes. the one octave of the module-keyboard can move over four octaves. the arpeggiator mode included 9 arpeggio play modes with additional different running directions, like up, down, updown, downup and different variations of noterepeats. the x-2013 module features additional 8 clock/gate outputs and the jacks for midi-in, midi-out and midi thru. the 8 clock/gate outputs can be used like 8 independently clock divider or sequencer tracks with internal or external midi-clock. each output features different sequence-pattern, clock or gate of the track and send a fix midi note on midi channel 10. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $368.00
	flame c-3 knob recorder the knob recorder features 3 sections of recordable knob movements, perfect for using the module like a manual cv recorder with the output resembling an lfo, sequencer or other modulation source. channel 1 has a cv input and also a reset is available. the module is compact and very handy. now with 102 seconds of record time! the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $238.00
	frap tools cgm channel the channel module is the first member of the channel family. its concept draws from the monophonic channel strip of a classic analog mixing console, to which we added cv over every key parameter: gain, fx sends, pan. in this way, it can be used both as a professional mixing channel and a creative tool for advanced automations. mechanical mute, pfl, and solo-in-place complete the feature set suitable both for studio and live performances. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $160.00
	grayscale algorhythm the algorhythm is an 8-step pulse sequencer. modules can be linked to create longer patterns. illuminated switches provide control over looped and one-shot playback, sequential and random modes, and gate/trig output for the pattern. loop length, pattern length, and gate/trig status can be modified in realtime. all settings are automatically saved in memory and restored at startup. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $266.00
	intellijel designs audio interface previous version of the intellijel audio i/o, this module features dual balanced line in / line out audio interface with meters. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $221.00
	intellijel designs dixie do not let the small size fool you, this is a very powerful full featured and precision vco in a tiny package. features a triangle core (superior for musical fm sounds), hi range (vco) and lo range (lfo), precise tracking within 0.1% over 8 octaves, 6 waveforms, and much more. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $176.00
	intellijel designs dixie ii the dixie ii has all the great qualities and features of the original dixie but has been made a bit wider (6hp instead of 4hp) for better spacing and is now skiff friendly. the panel knobs are bolted on and the jacks have more space between them. this makes a perfect modulation source to pair with the rubicon. add a μfold, μvca and μfade and you have all the ingredients for a powerful and highly flexible complex timbre generator. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $187.00
	intellijel designs korgasmatron mk1 the original circuit was designed by analog guru david g. dixon after carefully studying and analyzing the classic korg ms-20 filter. his work resulted in a completely original circuit based around ssm2164 vca chips. this design is capable of almost identical results but is far more versatile. features two independent filters, each with lp, hp and notch modes. oscillates very easily and can be used as a dual sine vco. built in full featured cross fader allows voltage controlled crossfading between the two filters. the xfade has a switch to select either unipolar (e.g., envelopes) or bipolar (e.g., lfo) control of the xfade position. there is also a switch to select direction. with nothing plugged into the xfade jack the xfade knob controls the fade position. when an external cv is patched in the same knob acts as an attenuator for the control signal. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $289.00
	intellijel designs μjack the μjack functions as the audio output device for your modular system. it converts modular-level voltages to line-level outputs suitable for driving amplifiers, recording devices, or daw interfaces. headphone monitoring is also supported via a low noise built-in headphone amp capable of driving high impedance studio headphones. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $102.00
	intellijel designs μvca version 1 of the μvca, this is a two-channel voltage controlled amplifier that features a response curve continuously adjustable between linear and exponential response. the unit is in good physical condition and works perfectly. our used price : $124.00
	intellijel designs μvca ii the μvca ii is a two-channel voltage controlled amplifier that features a response curve continuously adjustable between linear and exponential response. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $124.00
	intellijel designs/cylonix shapeshifter cylonix and intellijel have collaborated to bring you a very sophisticated and deeply complex wavetable vco. at the core of this module is very powerful fpga board that he has pushed to the absolute max of its capabilities and crammed full of features. they wanted to create a module that really worked well in the modular context so there are a lot of modulation and control possibilities. each vco can select from 128 banks of wavetables , each with 8 individual 512-sample waveforms for a total of 1024 waves. the choice of waveform within the currently selected bank is under voltage control. there is smooth interpolation between the waveforms within a bank, allowing a very wide range of different possible waveshapes. oscillator 1 can be operated in a chord mode, which runs 8 copies of the oscillator in parallel with adjustable detuning, leading to very fat, rich waveforms. the oscillators have extensive modulation capabilities including audio rate (98khz) frequency and phase modulation (fm and pm) via external sources. nonlinear combination processes allow the outputs of the two oscillators to interact to generate complex timbres and sonic textures. there are 64 user selectable chords. the shapeshifter module also includes the analog wave folder circuitry from module to add analog warmth and metallic rasps to the digital oscillator output. external signals can also be patched in. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $477.00
	kilpatrick audio k1600 midi converter the combination of midi and analog offers the modular synth player incredible flexibility and control. although analog voltages are the preferred method for carrying many kinds of signals, midi offers powerful integration with computers and a wide variety of controllers, keyboards and other equipment. the k1600 midi converter provides 10 outputs in the analog domain. two pairs of cv and gate outputs provide high resolution note control, four trigger outputs allow analog drum modules to be used with midi drum machines, and the clock and reset outputs enable midi control over analog clock-based devices such as sequencers. the module is in good physical condition and works perfectly. for more info please click here. our used price : $240.00
	l-1 stereo mixer 2-channel discrete voltage controlled stereo mixer with send outputs and return input. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $325.00
	l-1 tuner digital tuner with chromatic, guitar, bass, violin, and ukulele setting. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $85.00
	modcan touch-sequencer resistive touch screen control of all sequence parameters. 4 rows of sequencing with up to 64 step length with chaining each row has own clock with variable row length. each of the 4 rows has separate gate, pitch ,note length and slew control for a total of 16 rows of sliders. memory storage for 99 sequences and 32 songs and all preferences. up to 8 sequences can be chained together into a song with 1-31 repeats per chained event. built in quantizer with both pre-set and user defined scales. quantize scales can be designed in real-time while sequencing. each row can have its own quantization scale or off. 4 independent internal clocks. 1:1 external clocking and 24ppq clocking modes. tap bpm. cv modulation input can be routed to any or all 16 pitch, gate, note length and slew destinations. reset for external run/stop control. random modes for each row independently and with external switching. performance mode for real-time switching between sequences. the module is in good physical condition and works perfectly. for more information, please click here. our used price : $480.00
	new systems instruments babel expander the babel expander from new systems instruments adds seven additional inputs for babel. babel's analog logic works with any number of inputs. chain multiple expanders together for 17, 24, 31, or even more inputs. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $56.00
	noise engineering loquelic iteritas v1 the loquelic iteritas is a 10hp digital vco with interpretations of three classic synthesis algorithms (vosim, summation synthesis, and phase modulation). it creates a huge variety of sounds parameterized by four tone and two pitch controls and cv control of it all. the module for sale is the first version, without the sync input. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $279.00
	noise engineering mimetic sequent and multium the mimetic sequent is a three pattern, sixteen step, pitch aware cv randomizer and recorder. an expander (mimetic multium) provides the three patterns out simultaneously as well as four randomized rhythm sources. the units are in good physical condition and work perfectly. for more information, please click here. our used price : $284.00
	noise engineering variatic erumption the variatic erumption is a dual-burst generator. when triggered, it produces a controllable sequence of gates synchronized to a lfo. a 1v/8va lfo is included. any external lfo/clock may optionally be used. bursts can be terminated early with the choke. burst length can be controlled as well as thepattern used for the burst. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $217.00
	noise engineering variatic sequent and multium the variatic sequent is a minimal trigger sequencer with flexible expander. the variatic multium is a 4hp expander for variatic sequent that allows users to send all output triggers separately as well as cv-control each. the units are in good physical condition and work perfectly. for more information, please click here. our used price : $198.00
	patching panda flipanda the patching panda flipanda is a dual attenuverter module with useful bonus features. the attenuverter channels can each produce an adjustable voltage offset up to 5v with no input patched, and their outputs are combined into sum and inverse sum outputs. as such, the flipanda can be extremely useful for dialing in precise modulation and combining multiple sources to generate complex cv. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $85.00
	pittsburgh modular dual index a dual, high quality, linear voltage controlled amplifier with both offset gain and cv attenuation for each channel plus a mix out. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $112.00
	pittsburgh modular inout two way communictaion line for audio between a modular the outside world. the inout is divided into two sections, output and input. an attenuated line out allows the inout to patch audio from the modular directly into effects pedals, mixers, audio interfaces, amplifiers, pa systems, or anything else that takes a ¼" jack. the ¼" mono output can be used as a line out for the modular or as an effects send that uses the input section for the effects return. the input section consists of a switched 10x/100x preamp designed to amplify the audio from the ¼" mono input to modular levels. guitars, synthesizers, effects pedals, and line level audio can be inserted into the modular signal chain. the inout is useful even without external patching. the two ¼" jacks are normaled together so with no ¼" return plugged in, the audio from the input is automatically routed through the amplifier to the output. at 10x, this allows the inout to be a great amplifer for boosting modular audio signals or switch to 100x amplification and overdrive the signal to distortion. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $72.00
	pittsburgh modular midi2 the midi2 converts standard midi note messages into the analog control voltages used by modular synthesizers. this allows a modular synthesizer to be controlled by a midi keyboard, sequencer, or daw. the two sets of gate (gt) outputs can be used to trigger envelope generators by providing a voltage of +5v. the control voltage (cv) outputs produce precisely 1volt per octave over a range of 10 octaves. control voltage outputs (cv1 and cv2) respond to pitch bend control messages without any additional patching. the sync output outputs a gate signal based on the midi clock signal. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $128.00
	pittsburgh modular midi3 the midi 3 is pittsburgh modular's third generation midi to cv converter packed with a robust list of features. it includes a complete set of mono and duophonic midi response modes, assignable cc and dedicated velocity outputs, a feature rich clock source with tap tempo, midi and external gate clock dividers, and multiple arpeggiator responses. this module is deep. a midi to cv module converts standard midi note messages into the analog control voltages used by modular and other analog synthesizers. this allows the synthesizer to be controlled by a midi keyboard, sequencer, or daw. the two cv outputs on the midi 3 can be used to control the pitch of an oscillator, cutoff frequency of a filter, or any other function that requires a control voltage signal. the set of gate outputs on the midi 3 can be used to trigger envelope generators or other modules expecting a gate or clock source. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $184.00
	pittsburgh modular toolbox useful multi-purpose module with four different functions: slew limiter, noise generator, sample and hold generator and voltage inverter. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $112.00
	promodular cloq the promodular cloq is a clock generator based on bpm with built-in divided outputs that are set to common musical times, has special sync and async modes and space control over the outputs. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $184.00
	qu-bit electronix nebulae v1 the nebulae is a granular sampler and dsp platform. its phase vocoder audio engine provides elastic audio, which can be time stretched, granularized, and mangled to no end. with independent control over pitch and speed, and granular controls such as overlap, window, and density, finding new sonic territory is only a knob turn away. nebulae can use live audio input, a recorded buffer, or audio files as the source material for its powerful audio manipulations. the live input buffer can record up to five minutes of stereo audio at 48khz, 24 bit. in addition, up to 75 mb of stereo audio can be loaded simultaneously through the usb port. no naming convention or special formatting necessary; just plug and play. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $370.00
	qu-bit electronix wave the wave is a voltage controlled, polyphonic sample player. it is designed for the simultaneous playback of high fidelity audio files. each channel has its own varispeed pitch control, allowing for countless permutations of the original sample. each unit ships with a microsd card replete with drum hits, synth sounds, vocal samples and more, ready to get you patching immediately. from drum machine to full blown music production system, the wave opens up a whole new world of sounds within your eurorack modular. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $384.00
	snazzy fx ardcore the ardcore - whatever you need your modular to be today. built around an arduino compatible chipset with all the controls you need for a eurorack module, the ardcore can fill almost any role you need it to. with its built in usb port, cv ins, gate outs, dac out and clock in, you have everything you need to begin experimenting with programming, or simply browsing the library of over 45 programs, each which turns the ardcore into a completely different module! for programmers and non-programmers alike: all the code is available. with an open source software foundation, you can be guaranteed that other people in the community will be contributing their own programs as well. and since it can be programmed from within the free arduino ide program, (osx, linux, or pc) its compatible with whatever computer you have. and for people who have never programmed but think they might like to try, ardcore gives you a whole lot of material to mess around with. you can change a value or delete some lines, save it as a new program and upload it to the ardcore in no time at all. who knows, maybe you'll even teach yourself how to write an amazing new module. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $264.00
	snazzy fx chaos brother the chaos brother is a new modulation module full of enough options and knobs to keep it interesting no matter where you decide to use it. with speed and chaos knobs, it is very easy to dial in just the right amount of craziness. at times like an lfo, other times generating wild patterns, jagged waveforms, or even strange bass blasts. use it to add vibrato to a melody, out of this world sweeps, hiccups, slow swirls, or use the smooth out for more subtle controlled modulation.the module is in good physical condition and works perfectly. for more information, please click here. our used price : $236.00
	snazzy fx tidal wave the tidal wave is in first line a sound processor with waveshaper, filter and vca but on the other hand a synth voice. a flexible vc-mix/crossfader section with is used to create comb filter effects. a vc-lfo and an autotrigger envelope plus an internal modulation buss are used for cv routing with interesting opposite going modulations. all sections of the module can be used individually. module is in good used condition & perfect working order. for more info please click here. our used price : $372.00
	stg soundlabs .shn the .shn is a 4 hp noise source and sample & hold module. both pink and white noise are provided in the upper section of the module. the lower section of the module is the sample & hold. white noise is normalized to the control input of the sample & hold section but that is easily interrupted by inserting a cable to the input jack. the trigger input results in a transition time of 200 microseconds and it can accept clock oscillations at rates up to 7 khz. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $128.00
	synthwerks fsr-4: classic the fsr-4 has four identical channels and can produce four independent pressure outputs and four separate gate outputs. internal movable jumpers allow any of one the four channel gate or pressure output control voltages to be routed to the standard internal cv and gate bus on doepfer style power bus boards. the force sensing resistor pressure sensor is a non-capacitance based polymer thick film technology, responding to any direct pressure. they are not affected by skin resistance, are water resistant, and never need cleaning or polishing. as force is applied to the sensor, the device's electrical resistance decreases and the fsr-4's circuit converts and scales this resistance change into the pressure output control voltage. the pressure scale control adjust this voltage range from 0 to over +10 volts. the pressure output is also read by gate threshold circuit and when this voltage passes a level determined by the gate threshold control, a gate is produced at the gate output and it's corresponding led will light. the force sensing resistor is an excellent human/machine interface sensor. you can even play them by pressing on them with other objects or while wearing gloves. rubber pads and other textured surfaces can be placed on top of the fsr-4's sensors to make a user defined custom feel to the playing surface. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $224.00
	tall dog electronics μbraids se the μbraids se (aka ubraids se or microbraids se) is a voltage-controlled digital oscillator/sound source in 8hp with a wide range of creative and useful sound generation algorithms (aka models). this redesigned μbraids se (special edition) is a new revision of μbraids that updates and simplifies the component layout and has a new panel design. it utilizes a custom miniature segmented led module, eliminating the need for a 2nd microprocessor and its supporting circuitry. μbraids se remains fully compatible with future upstream braids firmware upgrades and any other alternate firmwares that are compliant with the standard braids design. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $277.00
	tiptop audio circadian rhythms circadian rhythms moves modular synthesizer technology another step forward by gluing all the pieces of a system together. each module or voice can now be programmed to play straight from an intelligent eight channel, 512 step master trigger sequencer made for composers looking to make music on the modular. building on the sequencing concept of step programing, multichannel patterns of musical phrases can be repeated, looped, chained, muted and manipulated on the fly in real time; and most importantly, all of this is done through a simple, clearly labeled interface. an array of multicolor illuminated buttons and innovative grid views provide a highly functional live performance sequencer with a beautiful glowing appearance reflecting the programmed music that will look amazing on stage for both performer and crowd. as a master controller, the heart of the modular synthesizer, circadian rhythms generates high precision clock and reset signals for all the other sequencers and devices in the system to align with and can also act as a high precision bridge for daw synchronization. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $400.00
	tiptop audio cymbl909 cymbals the cymbl909 is a dual voice module containing the tr-909's original crash and ride circuits adapted for use in eurorack modular synthesizer format and was tested to sound like a fresh machine coming out of the assembly line back in the 80s. the original circuits use a combination of low-fi 6 bit sound samples that pass through a series of analog elements that provide envelope and filtering to the source sound. the cymbl909 module adds manual and voltage control of the sample's analog tuning section creating tones which range from heavy industrial at the low end, to the original crash/ride sound at the mid range, and bright hats like sounds at the top end. modulating the tune with an envelope, cv sequencer or lfo makes interesting sound bending effects, which can be applied either in or out of sync with the triggering of the sounds. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $156.00
	wmd phase displacement oscillator mk1 this hybrid vco has all the feel of an analog vco but with the benefits of digital waveshaping. the pdo will easily find a home in your system! the pdo exists to utilize the phenomenon of phase modulation (pm). this allows for the relative phase difference of its outputs to be set or modulated, producing very interesting sounds. the result is similar to frequency modulation (fm) but affects the output to a greater degree without affecting the stability of the initial frequency. pm has the same benefits of quadrature filters/sine wave generators and greatly exceeds their capabilities at audio rate modulations. pm is highly useful for for creating metallic and bell tones and very controlled harmonic interactions. because pm affects the relative phase and not the frequency of the waveform generated, the pdo can self modulate its pm inputs. thils creates complex harmonic signals that seem to vary in frequency but are quite stable. phase modulation is also quite powerful when using the pdo as an lfo. adjusting the relative phase of each output allows for very precise modulation of other modules. each output can have any of the available waveforms simultaniously. there is a myriad of modulation possible with the pdo! the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $340.00
	wmd/ssf vc mini slew the mini slew is a feature packed function generator and voltage controlled slew limiter. transient functions are generated using the rise, fall and shape controls. complex functions can be generated using the voltage controlled shape and vari-out via direct cv inputs. mini slew features a novel time compensation mode which permits the timing of the transient to remain relatively constant while the shape parameter is adjusted. cv sum mode permits a single cv patched into rise or fall to process both parameters or two cvs patched into rise and fall to be summed and applied to both parameters. additional features include vc cycle (toggle on/off), end of rise and end of fall outputs, fm input and an led voltmeter for monitoring the amplitude of the direct positive output. the unit is in good physical condition and works perfectly. for more information, please click here. our used price : $160.00